Delta EMC-PG01L PG Card

$195.30

  • Encoder Feedback Card, Line Driver
  • Compatible with C2000 Series

EMC-PG01L Encoder Feedback Card, Line Driver; VFD-C, CP

 

Terminals Descriptions
PG 1 VP Output voltage for power: +5 V / +12 V ± 5% (use FSW3 to switch +5 V / +12 V)
Max. output current: 200 mA
PG1 DCM Common for power and signal
PG 1 A1, ï¿£Aï¿£1,
B1, ï¿£Bï¿£1,
Z1, ï¿£Zï¿£1		 Encoder input signal (Line Driver)
Open collector input: +5 V / +24 V *Note1
1-phase or 2-phase input
Max. input frequency: EMC-PG01L: 300 kHz; EMC-PG02L: 30 kHz
PG2 A2, A2 ￣￣,
B2, ï¿£Bï¿£		 Pulse input signal (Line Driver or Open Collector)
Open collector input: +5 V / +24 V *Note1
1-phase or 2-phase input
Max. input frequency: EMC-PG01L: 300 kHz; EMC-PG02L: 30 KHz
PG OUT
AO,
PG OUT AO, ï¿£Aï¿£O,
BO, ï¿£Bï¿£O,
ZO, ï¿£Zï¿£O, SG		 PG card output signals. Division frequency function: 1 ~ 255 times
Max. output voltage for Line driver: 5 VDC
Max. output current: 15 mA
Max. output frequency: EMC-PG01L: 300 kHz; EMC-PG02L: 30 kHz
SG: The GND of PG card is the same as the host controller or PLC, so a common
output signal is attained