Screw torque of terminal: 5kgf-cm (max.)
Wire gauge: 12~24 AWG
If the extension card is installed on the AC motor drive, AC motor drive will detect the
extension card automatically, and it can also use the parameter Group 11 for setting. In
case there is no extension card installation, the parameters only have Group 0 ~ Group 10
for setting. Please refer to manual CH.5 for detail parameter settings.
Environment (Please use this product indoor with no dust, corrosive gas and liquid .)
CALL 800-985-6929
Speak to an Expert Mon-Fri 7AM - 7PM CST